System Error Codes
2-24
HP DesignJet 5000 and 5500 Series Printers Service Manual
System Error: 0D0005 03180382 (Non-Continuable)
Problem
Description:
After cutting the media, the Printer cannot deactivate the Cutter.
Corrective Action: Try the following:
Check the Cutter and the Carriage Assembly to make sure that
they are installed correctly.
System Error: 0FXXXX (Non-Continuable)
Problem
Description:
A Firmware Error has occurred.
Corrective Action: Refer to System Error Code ffff ffff xxxxxxxx.
System Error: 0F0200 00b007bc
Problem
Description:
This is an error related to an internal crash involving media profiles
and memory.
Corrective Action: Try the following:
This error is sporadic and very rare; just switching the Printer
OFF and ON again will cause it to disappear.
If the customer has this problem frequently, recommend
upgrading the firmware revision to A.02.xx in order to lower the
frequency of the error.
NOTE This problem is solved in any A.02.xx firmware release.
System Error: 0F0200 00b007E5
Problem
Description:
Refer to System Error Code 0F0200 00b007bc.
