System Error Codes
2-12
HP DesignJet 5000 and 5500 Series Printers Service Manual
System Error: 06030C
Problem
Description:
Bad Line Sensor.
Corrective Action: Try the following:
Replace the Line Sensor Page 8-53.
Replace the Carriage Assembly Page 8-46.
Replace the Trailing Cable Page 8-36.
Replace the Main PCA Page 8-81.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 06040C
Problem
Description:
Line Sensor not connected correctly.
Corrective Action: Try the following:
Check/reconnect the Line Sensor.
Replace the Line Sensor Page 8-53.
Replace the Carriage Assembly Page 8-46.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
