A SERVICE OF

logo

Open as PDF
next previous
Removal and Installation
8-113
HP DesignJet 5000 and 5500 Series Printers Service Manual
16. Remove the Booster Fan - Refer to
Page 8-108.
17. Remove the Media Sensor - Refer to
Page 8-109.
18. Remove the Entry Roller - Refer to
Page 8-111.
19. Remove 3 T-15 screws (Type J) that
secure the Center Guide to the left
Sideplate.
20. Remove 1 T-15 screw (Type J) and 2
T-20 screws (Type T) that secure the
Center Guide to the right Sideplate.
21. Remove the Center Guide as follows:
Lift it from the front to release it.
Pull it out in a rotating movement.
1
2