A SERVICE OF

logo

Removal and Installation
8-20
HP DesignJet 5000 and 5500 Series Printers Service Manual
Right Hand Trim
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove Right Rear Cover - Refer to
Page 8-16.
2. Remove Right Hand Cover - Refer to
Page 8-10.
3. Remove Media Lever Assembly -
Refer to Page 8-18.
4. Disconnect the Sensors cable from
position P27 on the Main PCA.
5. Remove 1 T-15 screws (Type F) and 1
T-20 (Type L) from the Right Hand
Trim.
P27