Hewlett-Packard 5000 Manual

A SERVICE OF

next previous

Removal and Installation

8-73

HP DesignJet 5000 and 5500 Series Printers Service Manual

6. Remove the T-15 screw (Type F) that

attaches the Drop Detector Assembly

to the Service Station.

7. Remove the Drop Detector from the

Service Station.

NOTE Move the Drop Detector

towards the front of the

Service Station until the

locating pin reaches the end.

8. Lift the Foam from the Service

Station.

NOTE The Foam may be full of ink

so be careful when handling

it.

NOTE If you replace the Drop

Detector you must perform

the following Service

Calibration:

 Service Station Page 5-11.

1

2

Pin