A SERVICE OF

logo

Removal and Installation
8-77
HP DesignJet 5000 and 5500 Series Printers Service Manual
Memory and BootROM DIMM’s
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove 4 T-10 screws (Type P) from
the DIMM Access Cover. Remove the
DIMM Access Cover.
2. To remove a DIMM, first push down
the lower locking tab and then push up
the upper locking tab to release the
DIMM.
1
2