A SERVICE OF

logo

Removal and Installation
8-120
HP DesignJet 5000 and 5500 Series Printers Service Manual
Heater Assembly (Only Applicable to the 5500 Series)
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Right Rear Cover - Refer
to Page 8-16.
2. Remove the Right Cover - Refer to
Page 8-10.
3. Disconnect the Heater Cable from the
Main PCA.
4. Release the Heater Cable from the
plastic clip.