Service Calibrations
5-31
HP DesignJet 5000 and 5500 Series Printers Service Manual
Calibration Error: 1042 (User)
Problem
Description:
Scan-Axis Alignment Error in "slow" speed section in Light Cyan
and Light Magenta Pattern.
Corrective Action: Try the following:
Perform Printhead Recovery (Page 6-15).
Perform the Service Scan-Axis Calibration (Page 5-7).
Replace both Printheads and repeat Printhead Alignment.
If the media used is a color media try the calibration with white
media. If the error persists replace the Lens Cover Page 9-5.
Replace the Carriage Assembly Page 8-46.
Calibration Error: 1060 (User)
Problem
Description:
Scan-Axis Alignment Error in "fast" speed section in Black and
Magenta Pattern.
Corrective Action: Refer to Calibration Error Code 1040.
Calibration Error: 1061 (User)
Problem
Description:
Scan-Axis Alignment Error in "fast" speed section in Cyan and
Yellow Pattern.
Corrective Action: Refer to Calibration Error Code 1041.
Calibration Error: 1062 (User)
Problem
Description:
Scan-Axis Alignment Error in "fast" speed section in Light Cyan
and Light Magenta Pattern.
Corrective Action: Refer to Calibration Error Code 1042.
Calibration Error: 2001 (User) and 2002 (User)
Problem
Description:
Closed Loop Color plot file is not available or is in the wrong
format.
Corrective Action: Download a Firmware Upgrade Page 9-13.
Calibration Error: 2003 (User)
Problem
Description:
The Printer has used all its SWAP memory and does not have
sufficient memory to read the plot.
Corrective Action: Power the Printer OFF and ON from the back of the Printer.
