A SERVICE OF

logo

Open as PDF
next previous
Print Quality
6-23
HP DesignJet 5000 and 5500 Series Printers Service Manual
Bear in mind that the transition could happen anywhere along the
line. Trust your perception!
How to Interpret the Result
If you get a number in the range 4.5 to 9.5, your printer is within the
expected color reproduction accuracy.
If you get a number lower than 4.5 or higher than 9.5, try the
following:
1 Make sure that the Color Calibration is ON.
2 Perform Color Calibration on that paper.
3 Replace the lens on the Line Sensor and repeat the color calibration.
4 Replace the Line Sensor Page 8-53.