Black Box MPSH8-D20-120V Multi-tool User Manual


 
CHAPTER 5: Configuration
87
WTI-Group-Access - Determines which plug group(s) the user will be
allowed to access. The argument for this command includes a character for
each, dened plug group. The rst character in the string is used to represent
the rst plug group dened, and the last character in the string represents the
last plug group dened. The following options are available for each
plug group:
0 = Off (Deny Access)
1 = On (Allow Access)
For example, to allow access to the rst three dened plug groups out of a total
of six dened plug groups, the command line would be:
WTI-Group-Access="111000"
Example:
The following command could be used to set the command access level to "User",
allow access to Serial Ports 1, 3, 5 and 7 and Plugs 1 and 2, and also allow access to
the rst two of ve dened plug groups:
tom Auth-Type:=Local, User-Password=="tom1"
Login-Service=Telnet,
Login-TCP-Port=Telnet,
User-Name="HARRY-tom",
WTI-Super="1",
WTI-Plug-Access="11000000",
WTI-Group-Access="11000",