Filter
Top Products
CHAPTER 17: Command Reference Guide
187
/I Reboot System (Default)
Reinitializes the Outlet Managed PDU and offers the option to keep user-dened
parameters or reset to default parameters. As described in Section 5.10.1, the /I
command can also be used to restore the unit to previously saved parameters. When
the /I command is invoked, the unit will offer the following reboot options:
• Unit to Reboot
• Reboot Only (Do NOT default parameters)
• Reboot & Default (Keep IP Parameters & SSH Keys)
• Reboot & Default (Default ALL parameters)
• Reboot & Restore Last Known Working Conguration
Availability: Administrator, SuperUser
Format: /I [Enter]
/UF Upgrade Firmware
When new versions of the Outlet Managed PDU rmware become available, this
command is used to update existing rmware as described in Section 16.
Note:
It will take about 15 minutes to complete the upgrade procedure for
the Outlet Managed PDU.
Availability: Administrator
Format: /UF [Enter]