Black Box MPSH8-D20-120V Multi-tool User Manual


 
OUTLET MANAGED PDU
130
8.4. The Plug Group Status Screen
The Plug Group Status screen shows the conguration details and On/Off status for
the Outlet Managed PDU’s user-dened Plug Groups.
Notes:
• When the Plug Group Status Screen is viewed by an
"Administrator" or "SuperUser" level account, all Outlet Managed
PDU plugs and plug groups are listed. When the Plug Status
Screen is viewed by a "User" or "ViewOnly" level account, the
screen will list only the plug groups that are allowed by that
account.
• In order to display the Plug Group Status screen, you must first
define at least one Plug Group as described in Section 5.6.
To display the Plug Group Status Screen via the Text Interface, type /SG and then
press [Enter]. To display the Plug Status Screen via the Web Browser Interface,
click on the "Plug Group Status" link. The Plug Group Status Screen lists the
following parameters for each Plug Group:
Group Name: The user-dened name for each Plug Group.
Plug: The alphanumeric number of each switched outlet in the Plug Group.
Plug Name: (Web Interface Only) The User Dened name for each
switched outlet in the Plug Group.
Default: The Default On/Off value for each switched outlet in the
Plug Group.
Boot Seq. Delay: The user-dened Boot/Sequence Delay for each switched
outlet in the Plug Group.
Status: The On/Off status of each switched outlet in the Plug Group. If
the Status column includes an asterisk, this means that this outlet is busy
completing another command, that was previously invoked, either by you or
another user.
Amps: The current, in Amps, being consumed by each switched outlet as
well as the total current, in Amps, being consumed by each Plug Group.
SNMP Index: (Text Interface Only) A permanent reference number that the
Outlet Managed PDU assigns to each Plug Group. The SNMP Index number
allows MIB commands to be addressed to a specic Plug Group. The SNMP
Index number will not change when other Plug Groups are deleted or created.