Black Box MPSH8-D20-120V Multi-tool User Manual


 
CHAPTER 5: Configuration
45
The following Power Source Conguration parameters are available:
Power Factor: Can be any value from 0.1 to 1.00. (Default = 1.00.)
Power Efciency: Can be any whole number from 1% to 100%.
(Default = 100%.)
Voltage Calibration: This option is used to calibrate the voltage readout on the
Outlet Managed PDU front panel. To calibrate the voltage, rst determine the
approximate voltage and then select the Voltage Calibration option and key in
the correct voltage. In the Web Browser Interface, the voltage is entered at the
System Parameters menu in the Voltage Calibration eld. In the Text Interface,
the voltage is entered in a submenu of the System Parameters menu, which is
accessed via the Voltage Calibration item. (Default = undened.)
Note:
In the Text Interface, this option is accessed via the Power
Configuration submenu.