Filter
Top Products
CHAPTER 5: Configuration
65
Modem Mode: Permits access to command mode and simplies connection
to an external modem. Modem Mode ports can perform all functions
normally available in Normal Mode, but Modem Mode also allows denition
of the following, additional parameters:
Reset String: Redenes the modem reset string. The Reset String can be
sent prior to the Initialization string. (Default = ATZ.)
Initialization String: Denes a command string that can be sent to
initialize a modem to settings required by your application.
(Default = AT&C1&D2S0=1&B1&H1&R2)
Hang-Up String: Although the Outlet Managed PDU will pulse the DTR
line to hang-up an attached modem, the Hang-Up string is often useful for
controlling modems that do not use the DTR line. (Default = undened.)
Periodic Reset Value: Determines how often the Reset String will be
sent to the modem at this port.
Note:
When communicating with the Outlet Managed PDU via modem,
these parameters will not be changed until after you exit command
mode and disconnect.