Filter
Top Products
OUTLET MANAGED PDU
54
• Plug Group Access: Determines which plug groups this account will be
allowed to control. For more information on Plug Groups, please refer to
Section 5.6. (Defaults; Administrator and SuperUser = All Plug Groups On,
User = All Plug Groups Off, ViewOnly = All Plug Groups Off.)
Notes:
• In order to use this feature, Plug Groups must first be defined as
described in Section 5.6.
• Administrator and SuperUser level accounts will always have
access to all plug groups.
• User Level accounts will only have access to the plug groups that
are defined via the Plug Group Access parameter.
• ViewOnly accounts are allowed to display the On/Off status of
plug groups via the Plug Status Screen, but are limited to the
plug groups specified by the account. ViewOnly accounts are not
allowed to invoke switching and reboot commands.
• Service Access: Determines whether this account will be able to access
command mode via Serial Port, Telnet/SSH or Web. For example, if Telnet/
SSH Access is disabled for this account, then this account will not be able to
access command mode via Telnet or SSH. (Default = Serial Port = On, Telnet/
SSH = On, Web = On.)
• Current/Power Metering: Enables/Disables current and power metering
for this account. When disabled, this account will not be able to view current
or power readings or display current or power history. Note that in order for
accounts to be able to display these logs, Current and Power Metering must be
enabled via the Systems Parameters menu as described in Section 5.3.
(Default = On.)