Filter
Top Products
OUTLET MANAGED PDU
118
• Notify Upon Clear: When this item is enabled, the Outlet Managed PDU
will send additional notication when the situation that caused the alarm
has been corrected. For example, when Notify Upon Clear is enabled, the
Outlet Managed PDU will send initial notication when it detects that a Ping
command has failed, and then send a second notication when it determines
that the IP address is again responding to the Ping command. (Default = On.)
• Email Message: Enables/Disables email notication for this alarm.
(Default = On.)
Note:
The Email Message parameter offers four different options: On, Off,
On (Copy to All Triggers) or Off (Copy to All Triggers). If either of
the "Copy to All Triggers" options is selected, then email notification
for all other alarms will be switched On or Off as indicated by this
parameter. For example, If "Off (Copy to All Triggers)" is selected,
then Email notification will be disabled for all other alarms too.
• Address 1, 2, and 3: These parameters are used to select which of the three
email addresses dened via the "Email Messages" menu (see Section 5.9.11)
will receive the email alarm notication messages generated by this alarm.
The Address parameters can be used to select one, or any combination of the
addresses dened via the Email Messages menu. (Default = All On.)
Note:
If Email addresses have been previously specified, then the text
under the parameters will list the current, user defined email
addresses.
• Subject: This parameter is used to dene the text that will appear in the
"Subject" eld for all email notication messages that are generated by this
alarm. (Default = "Alarm: Ping-No-Answer")