Filter
Top Products
OUTLET MANAGED PDU
50
In the default state, the Outlet Managed PDU includes one predened account that
provides access to Administrator commands and allows control of all of the Outlet
Managed PDU’s switched power outlets. The default username for this account is
"super" (lowercase, no quotation marks), and the password for the account is
also "super".
Notes:
• In order to ensure security, it is recommended that when initially
setting up the unit, a new user account with Administrator access
should be created, and the "super" account should then
be deleted.
• If the Outlet Managed PDU is reset to default parameters, all user
accounts will be cleared, and the default "super" account will
be restored.
5.4.2. Plug Access
Each account can be granted access to a different selection of power outlets (plugs)
and plug groups. When accounts are created, the Plug Access parameter and the
Plug Group Access parameter in the Add User menu or Modify User menu are used
to grant or deny access to each plug or plug group. In addition, each access level
also restricts the plugs and plug groups that the account will be allowed to access:
• Administrator: Administrator level accounts are always allowed to control all
plugs and plug groups. Plug access cannot be disabled for Administrator level
accounts.
• SuperUser: SuperUser accounts allow access to all plugs and plug groups.
Port access cannot be disabled for SuperUser accounts.
• User: User level accounts are only allowed to issue switching commands to
the plugs and plug groups that have been specically permitted via the "Plug
Access" parameter in the Add User and Modify User menus.
• ViewOnly: ViewOnly level accounts are not allowed to issue switching
commands. ViewOnly accounts can display the On/Off state of plugs and plug
groups, but are limited to the plugs and plug groups specied by the account.