Black Box MPSH8-D20-120V Multi-tool User Manual


 
OUTLET MANAGED PDU
140
COMMAND MENU: Version 1.20a
DISPLAY CONFIGURATION
/S [s] Plug Status /F System Parameters
/SG Plug Group Status /P Port Parameters
/SN Network Status /PL [s] Plug Parameters
/H Command Menu (Help) /G Plug Grouping Parameters
/L Log /N Network Conguration
/M Current Metering /RB Reboot Options
/J [*] Site ID /AC Alarm Conguration
/I Reboot System
CONTROL /UF Upgrade Firmware
/X Exit Command Mode /TEST Test Network Options
/C <n> Connect - Local +-------------------------------+
/D <n> Disconnect Port | n Port #/name |
/BOOT <s> Boot Plug | s s+s s:s Plug #/name |
/ON <s> Turn on Plug | k Key type (1-3) |
/OFF <s> Turn off Plug | * "all" |
/DPL Default all plugs | <> Required entry |
/U Send Parameter File | [] Optional entry |
/K <k> Send SSH Keys | , Link multiple plug commands|
/UL Unlock (Invalid Access) +-------------------------------+
Add ,Y to bypass "Sure?"
OMPDU>
Figure 9-1: The Help Menu (Administrator Mode; Text Interface)
9.2. Operation via the Text Interface
When using the Text Interface, all switching functions are performed by invoking
simple, ASCII commands. ASCII commands are also used to display status screens
and to log out of command mode. The Text Interface includes a Help Menu, which
summarizes all available Outlet Managed PDU commands. To display the Text
Interface Help Menu (Figure 9-1), type /H and press [Enter].
Note:
When the Help Menu is displayed by a SuperUser, User or ViewOnly
level account, the screen will not include commands that are only
available to Administrator level accounts.