Black Box MPSH8-D20-120V Multi-tool User Manual


 
CHAPTER 5: Configuration
31
c) Via Modem: Use your communications program to dial the number for
the external modem which you have connected to the Outlet Managed
PDU’s Setup Port.
2. Login / Password Prompt: A message will be displayed, which prompts
you to enter a username (login name) and password. The default username is
"super" (all lower case, no quotes), and the default password is
also "super".
3. If a valid username and password are entered, the Outlet Managed PDU will
display the Plug Control Screen.
5.1.2. The Web Browser Interface
The Web Browser Interface consists of a series of web forms, which can be used to
select conguration parameters and perform reboot operations by clicking on radio
buttons and/or entering text into designated elds.
Note:
In order to use the Web Browser Interface, Web Access must first be
enabled via the Text Interface Network Parameters Menu (/N), the
Outlet Managed PDU must be connected to a TCP/IP network, and
your PC must be equipped with a JavaScript enabled web browser.
1. Start your JavaScript enabled Web Browser, key the Outlet Managed PDU’s
IP address (default = 192.168.168.168) into the web browser’s address bar,
and press [Enter].
2. Username / Password Prompt: A message box will prompt you to enter
your username and password. The default username is "super" (all lower
case, no quotes), and the default password is also "super".
3. If a valid username and password are entered, the Plug Control Screen will
be displayed.
5.1.3. Access Via PDA
In addition to the Web Browser Interface and Text Interface, the Outlet Managed
PDU command mode can also be accessed by PDA devices. Note however, that due
to nature of most PDAs, only a limited selection of Outlet Managed PDU operating
and status display functions are available to users who communicate with the unit
via PDA.