Filter
Top Products
CHAPTER 5: Configuration
85
5.9.10. RADIUS Parameters
The RADIUS Conguration Menus offer the following options:
• Enable: Enables/Disables the RADIUS feature at the Network Port.
(Default = Off.)
• Primary Address: Denes the IP address or domain name (up to 64 characters
long) for your primary RADIUS server. (Default = undened.)
• Primary Secret Word: Denes the RADIUS Secret Word for the primary
RADIUS server. (Default = undened.)
• Secondary Address: Denes the IP address or domain name (up to 64
characters long) for your secondary, fallback RADIUS server (if present.)
(Default = undened.)
• Secondary Secret Word: Denes the RADIUS Secret Word for the secondary
RADIUS server. (Default = undened.)
• Fallback Timer: Determines how long the Outlet Managed PDU will continue
to attempt to contact the primary RADIUS Server before falling back to the
secondary RADIUS Server. (Default = 3 Seconds.)
• Fallback Local: Determines whether or not the Outlet Managed PDU will
fallback to its own password/username directory when an authentication attempt
fails. When enabled, the Outlet Managed PDU will rst attempt to authenticate
the password by checking the RADIUS Server; if this fails, the Outlet Managed
PDU will then attempt to authenticate the password by checking its own internal
username directory. This parameter offers three options:
Off: Fallback Local is disabled (Default.)
On (All Failures): Fallback Local is enabled, and the unit will fallback to
it’s own internal user directory when it cannot contact the Radius Server, or
when a password or username does not match the Radius Server.
On (Transport Failure): Fallback Local is enabled, but the unit will only
fallback to it’s own internal user directory when it cannot contact the
Radius Server.
• Retries: Determines how many times the Outlet Managed PDU will attempt to
contact the RADIUS server. Note that the retries parameter applies to both the
Primary RADIUS Server and the Secondary RADIUS Server. (Default = 3.)