Filter
Top Products
CHAPTER 17: Command Reference Guide
181
/ON Switch Plug(s) ON
Switches selected plugs(s) or Plug Group(s) On, as described in Section 9.2.2. When
the /ON command is used to switch more than one plug, Boot/Sequence Delay
Period will be applied as described in Section 5.7.
Note:
When this command is invoked in Administrator Mode or SuperUser
Mode, it can be applied to all Outlet Managed PDU plugs and Plug
Groups. When this command is invoked in User Mode, it can only
be applied to the plugs and/or Plug Groups that have been enabled
for the account.
Availability: Administrator, SuperUser, User
Format: /ON <s>[,Y] [Enter]
Where:
s The number or name of the plug(s) or Plug Group(s) that you intend to
Switch On. To apply the command to several plugs, enter a plus
sign (+) between each plug number. To apply the command to a range
of plugs, enter the numbers for the rst and last plugs in the range,
separated by a colon character (:). To apply the command to all plugs
allowed by your account, enter an asterisk character (*).
,Y (Optional) Suppresses the command conrmation prompt.
Example:
Assume that your account allows access to Plug A2 and Plug A3. To switch Plugs
A2 and A3 On, without displaying the optional command conrmation prompt,
invoke following command line:
/ON A2+A3,Y [Enter]