Filter
Top Products
E6581160
31
4
4.2.2 How to set extended parameters
The VF-S11 has extended parameters to allow you to make full use of its functions.
All extended parameters are expressed with H and three digits.
Basic parameters
H
H～H
ENT
Press the MODE key once and use the VW key
to select H from the basic parameters.
Press the V key or the W key to
change the set value. Pressing
the ENTER key allows the reading
of
parameter setting.
MODE
[Steps in key entry for extended parameters]
: switches to the setting monitor mode.(Displays
CWJ)
: Selects the extended parameter whose setting needs to be changed.
: Changes the parameter setting.
Saves the changed value of the extended parameter setting.
Pressing the key instead of the key moves back to the previous status.
: Selects "H" from basic parameters.
: The first extended parameter “HK” (Low-speed signal output frequency) is displayed.
: Reads the programmed parameter setting.
MODE
MODE
* See 7.3 for extended
parameters.