Filter
Top Products
Greensmaster 1000/1600Traction and Reel Drive Systems Page 4 – 28
5. Slide locking collar onto the differential axle (Fig.
38).
6. Reinstall rear box cover (38) and differential boot
(43) to the differential axle and countershaft housing (1)
(Fig. 33).
7. Reinstall bearing housing for the right differential
axle (see Differential Axle Pulley and Bearing Installa-
tion).
8. Reinstall bearing housing for the left differential
axle (see Differential Axle Pulley and Bearing Installa-
tion).
IMPORTANT: Align axles so they turn freely before
striking the locking collar.
9. Lock locking collar by striking it with a punch in the
counterclockwise direction. Tighten set screw on the
locking collar (Fig. 38).
10. Reinstall idler pulley to the countershaft housing
(Fig. 40). Secure idler pulley with cap screw and lock
washer. Tighten cap screw until washer just starts to
compress. Spacer must be free to rotate (Fig. 41).
11. Adjust differential belt tension and reinstall front and
rear box covers (see Differential Belt in the Adjustments
section).