Filter
Top Products
Greensmaster 1000 Grooming Reel KitPage 8 – 15
Figure 18
FRONT
RIGHT
1. Belt cover
2. Clutch drive adapter
3. Needle bearing
4. Clutch pin
5. Compression spring
6. Driver pulley
7. Roller bearing
8. Belleville washer
9. Clutch release disc
10. Special screw
11. Flange bushing
12. Set screw
13. Clutch knob
14. Flat washer
15. Lock nut
16. Poly washer
2
3
45
6
7
8
9
10
16
11
12
13
14
15
1
CLUTCH
ASSEMBLY
Removal
Note: An older model of the GR 1000 has be used for
illustrating purposes The procedures are the same for
both older and newer models except as noted.
1. Make sure engine is OFF. Remove high tension
lead from the spark plug. Place mower on a level surface
or on a workbench.
2. Remove four cap crews and lock washers and then
the reel drive cover (Fig. 19).
3. On newer models, loosen drive belt on the reel drive
assembly as follows:
A. Lower grass shield by loosening both cap
screws and lock nuts securing the shield to the
frame (Fig. 20).
B. Loosen cap screw on clutch housing. Pivot idler
pulley counterclockwise (arrow direction) to loosen
reel drive belt. Remove reel drive belt (Fig. 21).
1. Cap screw & lock washer 2. Reel drive cover
Figure 19
1
2
1. Grass shield
2. Cap screw
3. Lock nut
4. Frame
Figure 20
2
3
4
NEWER MODELS
1
1. Cap screw
2. Clutch housing
3. Idler pulley
4. Drive belt
Figure 21
1
3
2
4
NEWER MODELS