Filter
Top Products
5-25
Basic Configuration
• Plug Access: Determines which outlet(s) this account will be allowed to control.
(Defaults; Administrator and SuperUser = All Plugs On, User = All Plugs Off,
ViewOnly = All Plugs Off.)
Notes:
• If your installation includes optional AUX units, please refer to Section 5.5.2.1
for additional instructions regarding granting user account access to plugs
on AUX units.
• In the Text Interface, Plug Access is configured by selecting item 4 and then
selecting the desired plugs from the resulting submenu.
• In the Web Browser Interface, Plug Access is configured by clicking on the
"plus" symbol to display the drop down menu, and then selecting the desired
plugs from the drop down menu.
• Administrator and SuperUser level accounts will always have access to all
plugs.
• User level accounts will only have access to the plugs that are defined via the
"Plug Access" parameter.
• ViewOnly accounts are allowed to display the On/Off status of plugs
via the Plug Status Screen, but are limited to the plugs specified by the
account. ViewOnly accounts are not allowed to invoke switching and reboot
commands.
• Plug Group Access: Determines which plug groups this account will be allowed
to control. Plug Groups allow you to define a selection of outlets, and then quickly
assign those outlets to new accounts by allowing the account to access the Plug
Group. For more information on Plug Groups, please refer to Section 5.6.
(Defaults; Administrator and SuperUser = All Plug Groups On, User = All Plug
Groups Off, ViewOnly = All Plug Groups Off.)
Notes:
• In order to use this feature, Plug Groups must first be defined as described in
Section 5.6.
• In the Text Interface, Plug Group Access is configured by selecting item 4
and then selecting the desired Plug Group(s) from the resulting submenu.
• In the Web Browser Interface, Plug Group Access is configured by clicking
on the "plus" symbol to display the drop down menu, and then selecting the
desired Plug Group(s) from the drop down menu.
• Administrator and SuperUser level accounts will always have access to all
plug groups.
• User Level accounts will only have access to the plug groups that are
defined via the Plug Group Access parameter.
• ViewOnly accounts are allowed to display the On/Off status of plug groups
via the Plug Status Screen, but are limited to the plug groups specified by the
account. ViewOnly accounts are not allowed to invoke switching and reboot
commands.