Filter
Top Products
3-5
Getting Started
c) Switch Outlet On:
i. Web Browser Interface: From the Plug Control Menu, click the down
arrow in the "Action" column for Plug A1 to display the drop down menu,
then select "On" from the drop down menu and click on the "Execute Plug
Actions" button.
ii. Text Interface: Type /ON A1 and press [Enter].
3. Logging Out: When you log off using the proper MPC command, this ensures
that the unit has completely exited from command mode, and is not waiting for the
inactivity timeout to elapse before allowing additional connections.
a) Web Browser Interface: Click on the "LOGOUT" link on the left hand side of
the screen.
b) Text Interface: Type /X and press [Enter].
3.3. Installing and Operating the Optional MPC-DISPLAY Hardware
Use the supplied RJ-45 cable to connect the optional MPC-DISPLAY unit to the MPC
unit. Connect one end of the RJ-45 cable to the “Remote” connector on the MPC front
panel; connect the other end of the cable to the RJ-45 receptacle on the back side of
the MPC-DISPLAY unit.
Note: The AUX Ports, located adjacent to the Remote port on the MPC front
panel, are used for connection to additional, remote MPC units. For more
information on connecting an MPC-DISPLAY unit or additional MPC units to the
AUX or Remote ports, please refer to Sections 4.5 and 5.8.2 and Appendix C.2.
The MPC-DISPLAY unit will receive five volts of power (for operation) via the RJ-45 cable
connected to the MPC unit.
To display amperage, kilowatts, volts and temperature for the MPC units that are
attached to the MPC-DISPLAY, press the “Display” button to toggle to the LED for
the desired MPC unit, and then press the “Display Selection” button several times to
select the desired reading; each time the “Display Selection” button is pressed, the
LED indicator adjacent to the button will toggle from Amps to kiloWatts to Volts to
Temperature.
This completes the Quick Start Guide for the MPC. Prior to placing the unit into
operation, it is recommended to refer to the remainder of this User’s Guide for important
information regarding advanced configuration capabilities and more detailed operation
instructions. If you have further questions regarding the MPC unit, please contact WTI
Customer Support as described in Appendix D.