Filter
Top Products
17-3
Command Reference Guide
17.3. Command Set
This Section provides information on all Text Interface commands, sorted by
functionality
17.3.1. Display Commands
/S Display Plug Status Screen
Displays the Plug Status Screen, which lists the current On/Off state, plus the plug
number, plug name, Boot/Sequence Delay value and Default On/Off value for each plug.
For more information, please refer to Section 8.2.
Note: In Administrator Mode and SuperUser Mode, all MPC outlets are
displayed. In User Mode and ViewOnly Mode, the Plug Status Screen will only
include the plugs allowed by your account.
Availability: Administrator, SuperUser, User, ViewOnly
Format:
/S [Enter]
/SG Display Plug Group Status Screen
Displays the Plug Group Status Screen, which lists the available Plug Groups, the
numbers of the plugs included in each Plug Group, the current On/Off state, the user-
defined Boot/Sequence Delay value, and the Default On/Off value for each plug. For
more information, please refer to Section 8.3.
Note: In Administrator Mode all user defined Plug Groups are displayed. In
SuperUser Mode, User Mode and ViewOnly Mode, the Plug Group Status
Screen will only include the Plug Groups allowed by your account.
Availability: Administrator, SuperUser, User, ViewOnly
Format:
/S [Enter]
/SN Display Network Status
Displays the Network Status Screen, which lists current network connections to the
MPC's Network Port. For more information, please refer to Section 8.1.
Availability: Administrator, SuperUser, User, ViewOnly
Format:
/SN [Enter]