Filter
Top Products
Sand Pro R 2020/3020/5020 Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Check Battery Fluid Level
Check Battery Cable Connections
{ Change Engine Oil
Lubricate Front Wheel Bearing
Every
25hrs
Every
100hrs
Annual Recommendations:
Items listed are recommended every 1,500 hours
or 2 years, whichever comes first.
Every
400hrs
Replace Spark Plugs
Replace Fuel Filter
Decarbonize Combustion Chamber
Check Engine RPM (idle and full throttle)
{ Initial break in at 8 hours
Change Hydraulic Oil
{ Replace Hydraulic Oil Filter
Replace Remote Air Cleaner Element
Replace Engine Air Cleaner Element
A–Level
Service
B–Level
Service
C–Level
Service
Every
800hrs
D–Level
Service
Replace Engine Oil Filter
Inspect Remote Air Cleaner Element
Inspect Engine Air Cleaner Element
Lubricate Steering Shaft Grease Fitting
Check Steering Chain Adjustment
{
Replace Moving Hoses
Lubricate Traction Control LInkage
Maintenance Procedure Maintenance Interval & Service
Adjust Valves and Torque Head Bolts
Drain and Clean Fuel Tank
(See proper section of Operator’s and Service Manuals for procedures and fluid specifications.)
Torque Wheel Lug Nuts
Replace Traction Interlock (Safety) Switch
Product Records and Maintenance
Page 2 – 8
Sand Pro 2020/3020/5020