Filter
Top Products
S205 Skid-Steer Loader
53 Operation & Maintenance Manual
OPERATING PROCEDURE (CONT’D)
Leveling The Ground Using Float (SJC - ‘ISO’ Pattern)
Figure 110
Press and hold the float button (1) [Figure 110] while the
joystick is in neutral. While lowering the lift arms (2)
[Figure 110], release the float button.
Tilt the bucket forward (3) [Figure 110] to change the
position of the cutting edge of the bucket.
With the bucket tilted farther forward, there is more force
on the cutting edge and more loose material can be
moved.
Drive backward to level loose material.
To disengage, press the float button again or raise the lift
arms (4) [Figure 110].
IMPORTANT
Never drive forward when the hydraulic control for lift
arms is in float position.
I-2005-1285
B-15522
2
1
3
4
P-24820
P-24802