Filter
Top Products
S205 Skid-Steer Loader
47 Operation & Maintenance Manual
OPERATING PROCEDURE (CONT’D)
Leveling The Ground Using Float (Foot Pedals)
Figure 96
Put the lift arms in float position by pushing the pedal all
the way forward (1) [Figure 96] until the pedal is locked
in the forward position.
Tilt the bucket forward (2) [Figure 96] to change the
position of the cutting edge of the bucket.
With the bucket tilted farther forward, there is more force
on the cutting edge and more loose material can be
moved.
Drive backward to level loose material.
Push the bottom of the lift pedal (3) [Figure 96] to unlock
the float position.
IMPORTANT
Never drive forward when the hydraulic control for lift
arms is in float position.
I-2005-1285
B-15522
B-15973
1
2
3