Filter
Top Products
S205 Skid-Steer Loader
95 Operation & Maintenance Manual
ALTERNATOR BELT
Belt Adjustment
Stop the engine.
Raise the operator cab. (See Raising on Page 71.)
Figure 172
Loosen the alternator mounting bolt (1) [Figure 172].
Loosen the adjustment bolt (2) [Figure 172].
Move the alternator until the belt has 8,0 mm movement
at the middle of the belt span with 66 N of force.
Tighten the adjustment bolt and mounting bolt.
Lower the operator cab. (See Lowering on Page 72.)
Belt Replacement
Loosen the alternator mounting and adjustment bolts (1
and 2) [Figure 172] and loosen the belt all the way.
Remove the belt and install a new belt.
Adjust the belt as shown above.
AIR CONDITIONING BELT
Belt Adjustment
Figure 173
Inspect the drive belt regularly for wear. (See SERVICE
SCHEDULE on Page 65.)
Open the rear door. Remove the drive belt cover.
Remove the compressor belt cover.
Loosen the mounting bolt (1) and the adjustment bolt (2)
[Figure 173].
Move the compressor to the rear until the belt has
8,0 mm movement at the middle of the belt span with
66 N force.
Tighten the adjustment bolt and the mounting bolt.
Install the covers and close the rear door.
Belt Replacement
Open the rear door. Remove the drive belt cover and the
compressor belt cover.
Loosen the mounting bolt (1) and the adjustment bolt (2)
[Figure 173] and move the compressor all the way
forward.
Remove the belt and install a new belt.
Adjust the belt as shown above.
P-24543
1
2
P-24288
1
2