Filter
Top Products
S205 Skid-Steer Loader
121 Operation & Maintenance Manual
(S205) LOADER SPECIFICATIONS (CONT’D)
Hydraulic System
Hydraulic Cylinders
Drive System
Traction
Environmental
Pump type Engine driven, gear type
Pump capacity at 3028 RPM 62,0 l/min
Pump capacity at 3028 RPM -
high flow option 96,5 l/min
System relief at Quick Couplers 22,4-23,1 MPa
Control valve Three-spool, open-centre type with float detent on lift and electrically controlled
auxiliary spool
Hydraulic filter Full-flow replaceable - 3 µm synthetic media element
Fluid lines SAE standard tubelines, hoses, and fittings
Lift cylinder (2) Double-acting
Lift cylinder bore 63,5 mm
Lift cylinder rod 38,1 mm
Lift cylinder stroke 601,2 mm
Tilt cylinder (2) Double-acting with cushioning feature on dump and rollback
Tilt cylinder bore 69,9 mm
Tilt cylinder rod 34,9 mm
Tilt cylinder stroke 335,0 mm
Transmission Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing
hydrostatic motors
Final drive chains Pre-stressed #80 HSOC endless roller chain (no master link) and sprockets in sealed
chaincase with oil lubrication. (Chains do not require periodic adjustments.) Two
chains per side with no idler sprocket.
Main drive Fully hydrostatic; four-wheel drive
Axle size 50,8 mm, heat treated. Axle tubes welded to chaincase. Labyrinth axle seal protection.
Wheel bolts Eight 9/16-inch wheel bolts fixed to axle hubs
Standard tyres 31 x 12-16.5, 10-ply, Bobcat Heavy Duty Wide Flotation
Travel speed 0-11,27 km/h
Operator L
pA
(98/37 & 474-1) 85 dB(A)
Noise level L
WA
(EU Directive 2000/14/EC) 101 dB(A)
Whole body vibration
(ISO 2631-1) 0,77 ms
-2
Hand-arm vibration (ISO 5349-1) 1,27 ms
-2