Filter
Top Products
S205 Skid-Steer Loader
Operation & Maintenance Manual 122
(S205) LOADER SPECIFICATIONS (CONT’D)
Fluid Capacities
Fluid Specifications
Controls
Chaincase reservoir capacity 30,3 l
Cooling system capacity with
heater 11,4 l
Cooling system capacity without
heater 10,2 l
Engine oil with filter capacity 8,7 l
Fuel tank capacity 90,8 l
Hydraulic reservoir capacity 18,2 l
Hydraulic / Hydrostatic system
capacity 34,1 l
Engine coolant Polypropylene glycol/water mix (53% - 47%) with freeze protection to -37°C
Engine oil Oil must meet API Service Classification of CD, CE, CF4, CG4, or better.
Recommended SAE viscosity number for anticipated temperature range.
* Can by used only when available with appropriate diesel rating.
For synthetic oil use the recommendation from the oil manufacturer.
Hydraulic fluid Bobcat Fluid (P/N 6563328).
Engine Hand lever throttle
Starting Key-type starter switch and shutdown. Glow plugs automatically activated by Standard
or Deluxe instrument panel.
Front auxiliary (standard) Electrical switch on right-hand steering lever
Rear auxiliary (optional) Electrical switch on left-hand steering lever
Loader hydraulics tilt and lift Separate foot pedals, optional Advanced Control System (ACS) or Advanced Hand
Controls (AHC) or Selectable Joystick Control (SJC)
Service brake Two independent hydrostatic systems controlled by two hand-operated steering levers
Secondary brake One of the hydrostatic transmissions
Parking brake Mechanical disc, hand operated rocker-switch on dash panel
Vehicle steering Direction and speed controlled by two hand levers
Auxiliary pressure release Pressure is relieved through the coupler block. Push in and hold for 5 s.