Bobcat S205 Lawn Mower User Manual


 
S205 Skid-Steer Loader
Operation & Maintenance Manual 6
INSTRUMENT PANEL IDENTIFICATION (CONT’D)
Right Panel (Key Switch)
Figure 6
The right instrument panel shown [Figure 6] is the Key
Switch Panel.
The table below shows the Icons and other components
of the Right Key Switch Panel.
* These functions are monitored and have associated SERVICE CODES. See SYSTEM SETUP & ANALYSIS on Page 103 for
description of SERVICE CODES.
B-15552B
15 17 19 21 23
25
27
16
18 20 22 24 26 28
29
REF. FUNCTION
ICON /
LIGHT
ALARM CODE CONDITION DESCRIPTION
15
Advanced
Control System
(ACS) (Opt.)
ON 3 Beeps * Error Error with Advanced Control System (ACS)
or Selectable Joystick Control (SJC).
16
Attachment
Control Device
(ACD)
ON
FLASHING
- - -
3 Beeps
- - -
*
- - -
Error
Electrical controlled attachment is present.
Error with Attachment Control Device (ACD).
17
General
Warning
ON
ON
FLASHING
3 Beeps
3 Beeps
Continuous
*
*
*
Error
WARNING
SHUTDOWN
Error with one or more engine or hydraulic functions.
Engine speed high or in shutdown.
Engine speed very high. Engine will stop in 10 seconds.
18 NOT USED - - - - - - - - - - - - - - -
19
Fuel Level ON
FLASHING
3 Beeps
3 Beeps
*Error
WARNING
Fuel level sender system fault.
Fuel level low.
20
Glow Plugs ON
FLASHING
- - -
3 Beeps
- - -
*
- - -
Error
Glow plugs are energized.
Error with glow plugs.
21
System Voltage ON 3 Beeps * WARNING Voltage low, high or very high.
22
Seat Belt ON - - - - - - - - - Light stays on for 45 seconds to remind operator to fasten seat belt.
23
Engine Oil
Pressure
ON
ON
FLASHING
3 Beeps
3 Beeps
Continuous
*
*
*
Error
WARNING
SHUTDOWN
Engine oil pressure sender out of range.
Engine oil level low.
Engine oil pressure very low. Engine will stop in 10 seconds.
24
Hydrostatic
Charge
Pressure
ON
ON
FLASHING
3 Beeps
3 Beeps
Continuous
*
*
*
Error
WARNING
SHUTDOWN
Hydraulic oil pressure sender out of range.
Hydraulic oil pressure low.
Hydraulic charge pressure very low. Engine will stop in 10 seconds.
25
Engine Coolant
Temperature
ON
ON
FLASHING
3 Beeps
3 Beeps
Continuous
*
*
*
Error
WARNING
SHUTDOWN
Engine coolant sender out of range.
Engine coolant temperature high.
Engine coolant temperature very high. Engine will stop in 10 seconds.
26
Hydraulic Oil
Temperature
ON
ON
FLASHING
3 Beeps
3 Beeps
Continuous
*
*
Error
WARNING
SHUTDOWN
Hydraulic oil temperature out of range.
Hydraulic oil temperature high.
Hydraulic oil temperature very high. Engine will stop in 10 seconds.
27
Engine Air Filter ON
FLASHING
3 Beeps
3 Beeps
*
*
Error
WARNING
Air filter with high restriction.
Air filter switch not connected.
28
Hydraulic Filter ON
FLASHING
3 Beeps
3 Beeps
*
*
Error
WARNING
Hydraulic filter with high restriction.
Hydraulic filter switch not connected.
29 Key Switch - - - - - - - - - - - - Used to start and stop the engine.