Filter
Top Products
S205 Skid-Steer Loader
Operation & Maintenance Manual 12
LIFT ARM BY-PASS CONTROL
Figure 16
The lift arm by-pass control (1) [Figure 16] is used to
lower the lift arms if the lift arms cannot be lowered
during normal operations.
• Sit in the operator's seat.
• Fasten the seat belt and lower the seat bar.
• Turn the knob (1) [Figure 16] clockwise 1/4 turn.
• Pull up and hold the knob until the lift arms slowly
lower.
TRACTION LOCK OVERRIDE
Operation
Figure 17
(Functions Only When The Seat Bar Is Raised And The
Engine Is Running) There is a TRACTION LOCK
OVERRIDE Button (1) [Figure 17] on the left instrument
panel which will allow you to use the steering levers to
move the loader forward & backward when using the
backhoe attachment or for loader service.
Press the TRACTION LOCK OVERRIDE Button once to
unlock traction drive. The TRACTION light (2)
[Figure 17] will be ON.
Press the button a second time to lock the traction drive.
The TRACTION light (2) [Figure 17] will be OFF.
NOTE: The TRACTION LOCK OVERRIDE Button will
unlock the traction drive when seat bar is
raised and the engine is running.
The TRACTION LOCK OVERRIDE Button will
function if brake is in the engaged or
disengaged position and the engine is
running.
P-54406
1
B-15551
2
1