Filter
Top Products
S205 Skid-Steer Loader
Operation & Maintenance Manual 28
PRE-STARTING PROCEDURE (CONT’D)
Seat Belt Adjustment
Figure 54
Squeeze both seat belt adjusters to release and lengthen
each half of the seat belt [Figure 54].
Fasten the seat belt.
Pull the ends of the belt through the belt adjusters so that
the seat belt is snug and the buckle is centered between
your hips [Figure 54].
Figure 55
3-Point Restraint - (Option) Connect the shoulder belt to
the lap belt (1) [Figure 55]. Pull the lap belt across to the
left side of the seat (2) [Figure 55] and fasten.
The shoulder belt must be positioned over your right
shoulder and the lap belt must be snug over your lower
hips [Figure 55].
IMPORTANT
Check the seat belt and shoulder belt retractors for
correct operation.
Keep retractors clean and replace as necessary.
I-2199-0200
Seat Bar
Figure 56
Lower the seat bar and engage the parking brake (1)
[Figure 56].
Put the foot pedals or hand controls in neutral position.
NOTE: Keep your hands on the steering levers and
your feet on the foot pedals (or footrests)
while operating the loader.
WARNING
AVOID INJURY OR DEATH
When operating the machine:
• Keep the seat belt fastened snugly.
• The seat bar must be lowered.
• Keep your feet on the pedal controls or footrests
and hands on steering levers.
W-2261-0799
P-16038
P-16041
N-21773
N-21774A
2
N-21773A
1
P-45114
1