Filter
Top Products
S205 Skid-Steer Loader
Operation & Maintenance Manual 50
OPERATING PROCEDURE (CONT’D)
Leveling The Ground Using Float (ACS - Handles,
SJC - ‘H’ Pattern)
Figure 103
Press and hold the float button (1) [Figure 103] while the
lever is in neutral. While lowering the lift arms (2)
[Figure 103], release the float button.
Tilt the bucket forward (3) [Figure 103] to change the
position of the cutting edge of the bucket.
With the bucket tilted farther forward, there is more force
on the cutting edge and more loose material can be
moved.
Drive backward to level loose material.
To disengage float, press the float button (1) again or
raise the lift arms (4) [Figure 103].
IMPORTANT
Never drive forward when the hydraulic control for lift
arms is in float position.
I-2005-1285
B-15522
B-15781
1
1
2
3
4