Filter
Top Products
S205 Skid-Steer Loader
23 Operation & Maintenance Manual
HYDRAULIC CONTROLS (CONT’D)
Relieve Hydraulic Pressure (Loader and Attachment)
WARNING
AVOID BURNS
Hydraulic fluid, tubes, fittings and quick couplers can
get hot when running machine and attachments. Be
careful when connecting and disconnecting quick
couplers.
W-2220-0396
Front Auxiliary Quick Couplers
When Connecting: Push the quick couplers tightly
together and hold for five seconds; the pressure is
automatically released as the couplers are installed.
When Disconnecting: Push the quick couplers tightly
together and hold for five seconds; then retract the sleeve
until the couplers disconnect.
Rear Auxiliary Quick Couplers
Figure 43
Press the AUXILIARY PRESSURE RELEASE Button (1)
[Figure 43]. Hold it for two seconds after the engine
comes to a complete stop. The pressure will be released.
High-Flow Hydraulics Operation (If Equipped)
Figure 44
The High-Flow function provides additional flow to the
system to operate an attachment which requires more
hydraulic flow (EXAMPLE: Planer).
Connect the attachment to the quick couplers (1)
[Figure 44].
Some attachments may have a case drain which needs
to be connected to the small quick coupler (2)
[Figure 44].
Figure 45
Press the HIGH FLOW button (1) [Figure 45].
Press a second time to disengage.
B-15551
1
P-43614
P-19820
3
1
2
B-15551
1