S205 Skid-Steer Loader
9 Operation & Maintenance Manual
INSTRUMENT PANEL IDENTIFICATION (CONT’D)
Option And Field Accessory Panels
Figure 11
Figure 12
NOTE: Parking Brake (13) [Figure 12] is Standard on
all loaders.
Side Accessory Panel [Figure 11]
Front Accessory Panel [Figure 12]
P16000
SIDE ACCESSORY PANEL
3
1
2
4
5
6
7
8
9
B-15993C
OR
17
B-15993H
FRONT ACCESSORY PANEL
10
11 12 13 14 15 16
REF.
NO.
DESCRIPTION FUNCTION / OPERATION
1 POWER PLUG Provides a 12V receptacle for
accessories.
2 NOT USED - - -
3 FRONT WIPER Press the top of the switch to start
the front wiper (press and hold for
washer fluid). Press the bottom of
the switch to stop the wiper.
4 REAR WIPER Press the bottom of the switch to
start the rear wiper. Press the top of
the switch to provide washer fluid to
clean the rear window.
5 NOT USED - - -
6 NOT USED - - -
7 FAN MOTOR Turn clockwise to increase fan
speed; counterclockwise to
decrease. There are four positions;
OFF-1-2-3.
8 AIR COND.
SWITCH
Press top of switch to start; bottom to
stop. Fan Motor (7) must be ON for
A/C to operate.
9 TEMP.
CONTROL
Turn clockwise to increase the
temperature; counterclockwise to
decrease.
REF.
NO.
DESCRIPTION FUNCTION / OPERATION
10 ADVANCED
CONTROL
SYSTEM (ACS)
Press the top to select Hand
Controls; bottom to select Foot
Controls.
11 NOT USED - - -
12 POWER
BOB-TACH
Press and hold the up arrow to
disengage the the Bob-Tach wedges.
Press and hold the down arrow to
engage the wedges into the
mounting frame holes.
13 PARKING
BRAKE
(Standard on all
Loaders)
Press the top to engage the
PARKING BRAKE; bottom to
disengage.
14 TURN SIGNAL
INDICATORS
Indicates left or right TURN
SIGNALS are ON.
15 HAZARD
LIGHTS
Press the top to turn the HAZARD
LIGHTS ON; right side bottom to turn
OFF.
16 ROTATING
BEACON
Press the top to turn the ROTATING
BEACON ON; bottom to turn OFF.
17 SELECTABLE
JOYSTICK
CONTROL (SJC)
Press the top to select ‘ISO’ Control
Pattern; bottom to select ‘H’ Control
Pattern.