Settings
45
5
Changing Your Channel Lineup
If your channel list is incorrect, you can change your channel lineup by repeating parts of
Guided Setup. From the Channel List, press ENTER to display the Change Channel Lineup
screen. Follow the on-screen instructions to change your channel lineup.
Channel Scan
If you have an antenna connected to your DVR, channel scanning identifies all the channels that
the antenna is currently receiving. Signals received via antenna are subject to weather
conditions and other environmental factors, so the availability of certain channels may vary.
This means that you may see channels appear and disappear from the channel list each time you
perform a channel scan.
When the DVR is unable to get a signal for a channel it had previously scanned, that channel is
marked with an asterisk ( * ) in the channel list. Try another channel scan at a later time, and the
channel may reappear.
Digital antenna channels (also known as ATSC channels) are often represented with a dash. For
example, a digital version of local channel 9 might be channel 9-1. Multiple digital versions of
local digital antenna channels may be available: 9-2, 9-3, etc. While watching live TV, to
change to one of these channels, press to enter a dash.
If there is a change to your cable
subscription package or channel
lineup, a TiVo message will inform you. Use
Channel Settings to ensure that your
Channel List reflects the change to your
lineup.
®
®
