4-18 Control Panel Options
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Blanking
These options are the same as those available using Display Properties. Adjust the settings and
click the OK box to save the changes. The changes take effect immediately.
Charge
This option presents the Voltage and Status of the Main and Backup batteries.
The option to charge and discharge the backup battery is available on this Power Properties /
Charge tab. Once the backup battery is completely discharged, the MX3-CE automatically begins
the Recharge process.
Primary Events
Access: Start / Settings / Control Panel / PEvents Icon
Factory Default Settings Primary Display Backlight
Wake on Resume button Enabled Disabled Disabled
Wake on keypress Enabled Enabled Disabled
Wake on touch screen Enabled Enabled Disabled
Wake on COM1 CTS Enabled Disabled Disabled
Wake on COM3 CTS Enabled Disabled Disabled
Wake on USB Connect Disabled Disabled Disabled
Wake on PCMCIA interrupt Disabled Disabled Disabled
Figure 4-13 Primary Events Display
Adjust the settings and click the OK box to save the changes. The changes take effect immediately.
