A SERVICE OF

logo

Scanner Parameters 6-67
E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide
Conversions
Convert UPC-E to UPC-A
Parameter Default Value: Disable
When this parameter is enabled, UPC-E (zero suppressed) decoded data is converted to UPC-A
format before transmission. After conversion, data follows UPC-A format and is affected by UPC-
A programming selections (e.g. Preamble, Check Digit, etc.).
When disabled, UPC-E (zero suppressed) decoded data is transmitted without conversion.
Select an option by scanning either of the barcodes shown below.
Enable
Convert UPC-E to UPC
-
Disable
Do Not Convert UPC-E
Convert UPC-E1 to UPC-A
Parameter Default Value: Disable
When this parameter is enabled, UPC-E1 (zero suppressed) decoded data is converted to UPC-A
format before transmission. After conversion, data follows UPC-A format and is affected by UPC-
A programming selections (e.g. Preamble, Check Digit, etc.).
When disabled, UPC-E1 (zero suppressed) decoded data is transmitted without conversion.
Select an option by scanning either of the barcodes shown below.
Enable
Convert UPC-E1 to UP
C
Disable
Do Not Convert UPC-E
1