6-32 Scanner Parameters
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Data Options
Prefix/Suffix Values
Prefix (P) Parameter Default Value: Null
Suffix1 (S1) Parameter Default Value: LF
Suffix2 (S2) Parameter Default Value: CR
Note: Parameter “Scan Data Transmission Format” must be set before selecting Prefix/Suffix
values.
A prefix and/or one or two suffixes may be appended to scan data for use in data editing. These
values are set by scanning four barcodes (resulting in a four digit number) that correspond to key
codes for various computers. See the table titled “ASCII Character Equivalents” at the end of this
chapter for keycodes.
If you wish to change your selection, scan the Data Format Cancel barcode.
Data Format C
Prefix
To begin setting Prefix values, scan this barcode:
Scan Prefix
Next, scan four numeric barcodes that correspond to the computer keycode using the “Keypad
Number Symbols” at the end of this chapter.
If you wish to change your selection, scan Cancel on the “Keypad Number Symbols” page.
