Scanner Parameters 6-37
E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide
Transmit AIM Code ID Character
AIM Code ID Character
Each AIM Code Identifier contains the three character string ]cm where:
] = Flag Character (ASCII 93)
c = Code Character
A Code 39
C Code 128
E UPC/EAN
F Codabar
G Code 93
H Code 11
I Interleaved 2 of 5
M MSI Plessey
S D2 of 5, IATA 2 of 5
X Code 39 Trioptic, Bookland EAN
m = Modifier Character
The modifier character is the sum of the applicable option values based on the following table.
Code
Type
Option
Value
Option
Code39
0 No Check character or Full ASCII processing.
1 Reader has checked one check character.
3 Reader has checked and stripped check character.
4 Reader has performed Full ASCII character conversion.
5 Reader has performed Full ASCII character conversion and checked one
check character.
7 Reader has performed Full ASCII character conversion and checked and
stripped check character.
Example: A Full ASCII barcode with check character
W,A+I+MI+DW, is transmitted as ]A7AimId where 7 =
(3+4).
Trioptic Code 39
0 No option specified at this time. Always transmit 0.
Example: A Trioptic bar code 412356 is transmitted as ]X0412356
Code 128
0 Standard data packet, No Function code 1 in first symbol position.
1 Function code 1 in first symbol character position.
2 Function code 1 in second symbol character position.
Example: A Code (EAN) 128 barcode with Function 1 character in the
first position,
FNC1
Aim Id is transmitted as ]ClAimId
I 2 of 5
0 No check digit processing.
1 Reader has validated check digit.
