1-14 Getting Started
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Set the Display Backlight Timer
Note: Refer to the section titled "Power Modes" later in this manual for information relating to
the power states of the MX3-CE.
Select Start / Settings / Control Panel / Display Properties / Backlight tab. Change the
parameter values and tap OK to save the changes.
The first option should be set when the MX3-CE will be running on battery power only. The
second option should be set when the MX3-CE will be running on external power (e.g. AC
adapter, cigarette adapter, powered cradle).
The default value for the battery power timer is 3 seconds. The default value for the external power
timer is 2 minutes.
Figure 1-14 Display Properties / Backlight
Set the Display Blanking Timer
Note: Refer to the section titled "Power Modes" later in this manual for information relating to
the power states of the MX3-CE.
Select Start / Settings / Control Panel / Display Properties / Blanking tab. This option is also
available by selecting Start / Settings / Control Panel / Power Properties / Blanking tab.
Change the parameter values and tap OK to save the changes.
The first option should be set when the MX3-CE will be running on battery power only. The
second option should be set when the MX3-CE will be running on external power (e.g. AC
adapter, cigarette adapter, powered cradle).
The default value for the battery power timer is 15 seconds. The default value for the external
power timer is 2 minutes.
Figure 1-15 Blanking Timer
