1-12 Getting Started
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Connect Audio Jack (Optional)
The MX3-CE audio jack is located on the endcap.
Figure 1-12 Connect Audio Jack
Insert the barrel end of the connector into the MX3-CE audio jack and push in firmly.
Note: The audio option draws power from the battery.
Power Button
Note: Refer to the section titled "Power Modes" later in this chapter for information relating to
the power states of the MX3-CE.
The power button is located above the ESC key on the keypad. When a battery is inserted in the
MX3-CE for the first time, the unit automatically powers on -- the Power button does not need to
be pressed.
Quickly tapping the Power button places the MX3-CE immediately in Suspend mode. Quickly
tapping the Power button again, or touching the screen, immediately returns the MX3-CE from
Suspend.
When the WinCE desktop is displayed or an application begins, the power up (or reboot) sequence
is complete.
Troubleshooting
The MX3-CE will not turn off – force a Reboot by holding the Power key down for 15 seconds
and the MX3-CE will reboot.
