LXE MX3-CE Manual

A SERVICE OF

next previous

Scanner Parameters 6-57

E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide

Power Mode

Note: The MX3-CE is designed to be operated in Low Power Mode. LXE recommends leaving

this value unchanged.

Parameter Default Value: Low Power

A parameter setting of Continuous On means the laser scanner will not power down until the MX3-

CE enters Suspend.

A parameter setting of Low Power means the laser scanner will enter low power mode after one

second of waiting for a SCAN button press. Pressing the SCAN button will begin the decode

sequence.

Select a Power Mode by scanning either of the barcodes shown below.

Continuous On

Continuous On

Low Power

Low Power