A SERVICE OF

logo

6-56 Scanner Parameters
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Parameter Scanning
Parameter Default Value: Enable
Use this parameter to decide whether scanner parameters can be set using the barcodes in this
chapter.
Note: When this parameter is disabled, scan the Set Defaults parameter barcode to enable
parameter scanning.
When disabled, either scan the Enable Parameter Scanning barcode or the Set All Defaults barcode
to reset the parameter and barcodes in this chapter can then be scanned.
When enabled, scanners can be configured using the barcodes in this chapter.
Select a mode by scanning either of the barcodes shown below.
Enable
Enable Parameter Sca
n
Disable
Disable Parameter Sca
n