A SERVICE OF

logo

6-42 Scanner Parameters
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Event Reporting
Note: These events have have no effect on the MX3-CE. Event requests from the host are
ignored by the MX3-CE OS.
The host can request the decoder to furnish certain information (events) relative to the decoder’s
behavior. The events listed below and on the following pages can be enabled or disabled by
scanning the appropriate barcodes.
Event Class
Event
Code
Reported
Decode Event
Default: Disable
Non parameter decode 0x01
Boot Up Event
Default: Disable
System power up 0x03
Parameter Event
Default: Disable
Parameter entry error
Parameter stored
Defaults set (and parameter
event is enabled by default)
Number expected
0x07
0x08
0x0A
0x0F
Decode Event
Parameter Default Value Disable
When enabled, the decoder generates a message to the host whenever a barcode is successfully
decoded. When disabled, no notification is sent.
Set this parameter by scanning one of the following barcodes.
Enable
Enable
Disable
Disable