6-18 Scanner Parameters
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
One Discrete Length (Parameter L1)
This option decodes only those codes containing a selected length. For example, when you want to
scan only Codabar symbols containing 14 characters, scan the “Codabar One Discrete Length”
barcode and then “1” and “4” barcodes using the “Keypad Number Symbols” at the end of this
chapter.
To begin setting one discrete length, scan this barcode:
Codabar - One Discrete Length
Next, scan two numeric barcodes that correspond to the desired value. Single digit numbers must
have a leading zero. If you wish to change your number selection, scan Cancel on the “Keypad
Number Symbols” page.
Two Discrete Lengths (Parameter L2)
This option decodes only those codes containing two selected lengths. For example, when you
want to scan only Codabar symbols containing 2 or 14 characters, scan the “Codabar Two Discrete
Lengths” barcode and then “0”, “2”, “1” and “4” barcodes using the “Keypad Number Symbols” at
the end of this chapter.
To begin setting two discrete lengths, scan this barcode:
Codabar - Two Discrete Lengths
Next, scan four numeric barcodes that correspond to the desired value. Single digit numbers must
have a leading zero. If you wish to change your number selection, scan Cancel on the “Keypad
Number Symbols” page.
